Add 12v accessories to just about anything with the PR-PSM. Simply bolt the mount down, run your 12v and speaker wires between the mounts, connect them to your battery and start adding accessories!
All of the Power Rail push fit locking accessories snap onto the surface mounts the same way they do on the Power Rail. Just loosen the locking nuts and you can rotate your light or speakers a full 360 degrees. Sold in pairs.
Care Instructions: While these mounts are designed to perform when exposed to water, build up inside the mounts combined with constant 12-volt power for extended periods of time can cause electrolysis and corrosion.
When using these powered mounts, ensure that the 12-volt power wire connected to the mounts includes a switch such that the 12-volt power can be turned off when the mounts and accessories attached to the mounts are not in use. Any accessories that are hung from the powered mounts should be removed, inspected for water build up, and allowed to dry after having been exposed to excessive from cleaning, pressure washing or heavy rain.
- MPN PR-PSM