need help. only have a serial #

chuckpt1979 · #1 02-18-2013, 08:02 PM

I have an 04 dodge ram with an after market radio. This bazooka tube was given to me and I know it works. I wanna get it hooked up but have no wiring. Has no identification on it except it says sas bazooka with a number at the bottom g45a8c0025. I need to know what wiring harness I have to get. It doesn't have RCA plug ins like an amp and its either a 6in or 8in. Thats all i got. I can't hook it up until I know. Please help.

Geneh · #2 02-19-2013, 08:47 AM

Is the connector a single row or double row?

chuckpt1979 · #3 02-19-2013, 11:26 AM

It has a double row of 7 equaling 14. To the right it has 2 knobs, below the connector is 2 fuses, and to the left is the positive and negative connectors. Hope that helps

heavyduty · #4 02-19-2013, 12:49 PM

Quote:

Originally Posted by chuckpt1979

It has a double row of 7 equaling 14. To the right it has 2 knobs, below the connector is 2 fuses, and to the left is the positive and negative connectors. Hope that helps

It sounds as if you have the A80 model Tube.

http://store.bazooka.com/RSA-hp-AWK-...ubes-P298.aspx

chuckpt1979 · #5 02-19-2013, 01:54 PM

that looks exactly like it. Thanks. Now I can order the wiring and get it hooked up. I hope it has a good amount of watts.

heavyduty · #6 02-19-2013, 02:11 PM

Quote:

Originally Posted by chuckpt1979

that looks exactly like it. Thanks. Now I can order the wiring and get it hooked up. I hope it has a good amount of watts.

80 watts at 4 ohms and 120 watts at 2 ohms. The A80 can drive a passive Tube, also known as a slave unit. You can also swap the original driver out for a DVC 4 ohm version. Wire the voice coils in parallel, leave the High Level Output wires alone and the amplifier is operating at 2 ohms mono.