Need help with fast-9999 harness extension

[jjdiggincrates]

I have been using the fast-9999 harness with my self amplified subwoofer for sometime now and it has been working well. i let the wires for the fast 9999 harness extension just lay around my car. the wires have been yanked around plenty and the end result is this: the "fast 9999 harness extension cable" as been a bit messed up near the end that goes into the subwoofer (as shown in picture), i might buy a new one but i would like to repair it if possible. cutting to the chase now: What is the color code for the fast 9999 extension cable? i have attached a photo to clarify what i am talking about because its a bit hard to describe. please help me and thanks for reading.

[jjdiggincrates]

Sorry you cant tell much from the picture, but some of the small wires have been pulled out of the top "plug" piece and i just need to know what order to put them back in

[heavyduty]

Originally Posted by jjdiggincrates

Sorry you cant tell much from the picture, but some of the small wires have been pulled out of the top "plug" piece and i just need to know what order to put them back in

The wires cannot simply be put back in place. For a true repair you will need a tool to disengage the connectors inside the Molex and a crimping tool at the very least, or, a soldering iron to securely make the connection.

The FAST-9999 will correctly identify the wires;

http://www.bazooka.com/pdf/current/F...tr_rev1_sm.pdf