mystery model number...

[hiphopfiend604]

hi all...

i am new to the forum and have an impossible scenario.

i recently realized that the 10" sub inside my bazooka tube has stopped working.

with no model number printed on the tube...i resorted to disassembly for any markings. i found three barcodes (one on the sub...one on the inside of the tube...and one on the amps protective grating)).

the label on the sub notes 1997.

so, here is my question: without a model number, bazooka reps in my country cant help me...how would i determine the amps power...or the tube's model number?


Anyone?

[heavyduty]

Originally Posted by hiphopfiend604

hi all...

i am new to the forum and have an impossible scenario.

i recently realized that the 10" sub inside my bazooka tube has stopped working.

with no model number printed on the tube...i resorted to disassembly for any markings. i found three barcodes (one on the sub...one on the inside of the tube...and one on the amps protective grating)).

the label on the sub notes 1997.

so, here is my question: without a model number, bazooka reps in my country cant help me...how would i determine the amps power...or the tube's model number?


Anyone?

If possible, post pictures of the Tube on the Forum. Also list what information is on the serial codes of the Tube and the subwoofer.

[hiphopfiend604]

ill try and post pics when i get home. in the meantime...something to work.with....



on the amp cage
"do not remove protective static cage from amp! A8D1009263"

on the inside of.the tube....16019548

on the sub
"warranty void if label removed!
WF10/1129-4 12-29-1997

01129475200086





thanks!!!

[heavyduty]

Originally Posted by hiphopfiend604

ill try and post pics when i get home. in the meantime...something to work.with....



on the amp cage
"do not remove protective static cage from amp! A8D1009263"

on the inside of.the tube....16019548

on the sub
"warranty void if label removed!
WF10/1129-4 12-29-1997

01129475200086





thanks!!!

You have an A80 Tube. Here is a link for some basic information, when I get a chance, I will post the specs later.

http://www.bazooka.com/tech/wiring-diagrams/A-80

For a replacement woofer use WF10415 or the WF1042.

[hiphopfiend604]

you have officially made my day!!!

if you post the specs...including amp specs...you will make my week!!!

[heavyduty]

Originally Posted by hiphopfiend604

you have officially made my day!!!

if you post the specs...including amp specs...you will make my week!!!

Amplifier Specs:
Rated output @ 4 ohm - 80 watts
Rated output @ 2 ohm - 120 watts

Crossover:
18dB per octave low pass electronic crossover; continuously variable from 60hz to 250Hz

Filter Type:
Third order Butterworth filter

Input Sensitivity:
High Level 2.4 volts to 25 volts RMS
Low Level 100mV to 1 volt RMS
Continuously variable gain control

Amplifier Frequency Response:
Crossover set at highest setting 15hz to 250Hz +0/-3dB
Crossover set at lowest setting 15Hz to 60 Hz +0/-3dB

Protection:
Thermal; over voltage; under voltage; on PC board reverse voltage (25 amp fuse); in-line power fuse 25 amp; fused output to slave unit (5 amp)

Turn-On Circuit Requirements:
ON Threshold 2.2 Volts; ON Current 6 mA @ 13.8 Volts

Auto Mode:
High Level Input 400mV RMS
Low Level Input 18mV RMS

Current Consumption:
@ maximum output: 26 Amps
@ rated power w/4 Ohms load: 10 Amps
@ rated power w/2 Ohms load: 16 Amps
@ idle 0.9 Amps
@ standby 11 mA

T102-A80
Woofer Size 10"
Efficiency 104 dB
Dimensions: 21.1" x 10.3" x 12.2"
Magnet Size: 28 oz.
Weight: 25 lbs.

[hiphopfiend604]

Awesome!!!! last question before you shoot me...replacement wiring harness??

[heavyduty]

Originally Posted by hiphopfiend604

Awesome!!!! last question before you shoot me...replacement wiring harness??

http://store.bazooka.com/RSA-hp-AWK-...ubes-P298.aspx