Originally Posted by Rodek
I have an old school T-16 dual tube (took a long time to find this old friend) and an MGA4150 amp. The T-16 is rated at 100 watts RMS per driver. If I bridge 2 channels of the MGA4150 at 8 ohms mono, will I be sending the tube the required 200 watts RMS?
Yes, bridging the MGA4150 for a 8 ohm load will bring the power output down to 100 watts.
You can also upgrade the drivers to the DVC version if you ever decide to run the MGA at a 4 ohm mono load.