Go Back   Club Bazooka > Bazooka Technical Forums > Amplified Tube Subwoofers

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 08-25-2014, 10:18 PM
jpalic's Avatar
jpalic jpalic is offline
Just Gettin Started
 
Join Date: Aug 2014
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 10
jpalic is on a distinguished road
Help 0003 Please help identify

I have a 6 inch amplified SAS-Bazooka bass tube from the early to mid 90's with no external markings other that SAS-Bazooka. I did find a tag on the inside of the unit (and another on the driver magnet) that reads F16A6D 396.
This thing has been sitting on the shelf for the past 10 years since I pulled it out of my truck. Now it's going to be installed in my son's car. This install will use the line level inputs but the trouble is on last install I cut off the line level wires flush to the connector. Now I need a new harness, connector or maybe just a pin extraction tool and I'm trying to figure out what will work. It is a white 14 pin double row connector. Best I can tell it is a Molex Mini-fit but I'm not absolutely sure. Anyone?
Attached Images
File Type: jpg tube.jpg (16.3 KB, 1 views)
File Type: jpg driver.jpg (84.2 KB, 1 views)
File Type: jpg connector.jpg (50.5 KB, 5 views)
Reply With Quote
  #2  
Old 09-09-2014, 12:23 PM
heavyduty's Avatar
heavyduty heavyduty is offline
Super Moderator
 
Join Date: Jan 2008
Posts: 2,950
Thanks: 351
Thanked 771 Times in 690 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 781
heavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to behold
Default Re: Please help identify

Quote:
Originally Posted by jpalic View Post
I have a 6 inch amplified SAS-Bazooka bass tube from the early to mid 90's with no external markings other that SAS-Bazooka. I did find a tag on the inside of the unit (and another on the driver magnet) that reads F16A6D 396.
This thing has been sitting on the shelf for the past 10 years since I pulled it out of my truck. Now it's going to be installed in my son's car. This install will use the line level inputs but the trouble is on last install I cut off the line level wires flush to the connector. Now I need a new harness, connector or maybe just a pin extraction tool and I'm trying to figure out what will work. It is a white 14 pin double row connector. Best I can tell it is a Molex Mini-fit but I'm not absolutely sure. Anyone?
That appears to be an A30.

http://www.bazooka.com/tech/wiring-diagrams/A-30

Here is your new harness;

http://store.bazooka.com/ELA-HP-AWK-...ubes-P294.aspx
__________________
power your system down
Reply With Quote
The Following User Says Thank You to heavyduty For This Useful Post:
Geneh (09-11-2014)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:10 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Template-Modifications by TMS
bazooka.com
SAS, BAZOOKA, BASS TUBES, and LISTEN TO YOUR EARS are registered trademarks of Southern Audio Services, Inc.