help!

monteman · #1 03-25-2005, 10:21 PM

ok i have 2 RXT2's 12"s im trying to bulid a box i never have built one before... i have a 1998 monte carlo.. i just wanted to bulid a rectangle box with a divider.. so each sub can use its own space... is thier like instructions or somthing i can get? for the mesurements?? lol i need help!!! ASAP to im need to build it tomarrow.. thanks!!

gearhead · #2 03-26-2005, 12:13 PM

Try this:
http://www.bcae1.com/spboxnew2.htm

NitroVW · #3 03-26-2005, 05:25 PM

This is another excellent free program called WinISD. Not the absolute easiest program to use at first but once you get used to it you're all set.

http://www.linearteam.dk/default.aspx?pageid=winisd

monteman · #4 03-26-2005, 05:45 PM

cool thanks!!

monteman · #5 04-03-2005, 11:41 PM

ok now, how do i hook up an amp? lol

NitroVW · #6 04-04-2005, 05:53 PM

You run a power wire from your battery to your amp (with an inline fuse within 18" from the battery). Then a ground from the amp to chassis (within 3ft, the smaller the better), a remote wire from your headunit to the amp, RCA's from your headunit to the amp, and then your speaker wires from the outputs to your subwoofer(s)/speakers.

monteman · #7 04-04-2005, 10:57 PM

i have a capacitor... do i just run that in between the power from the batterie to the amp? and do i ground that to?

NitroVW · #8 04-04-2005, 11:33 PM

It runs inline with your power wire, again, try to put it as close to the amp as possible.

monteman · #9 04-05-2005, 10:52 PM

cool thanks man!!