Go Back   Club Bazooka > Bazooka Technical Forums > Amplified Tube Subwoofers

Notices

Reply
 
Thread Tools Display Modes
  #151  
Old 05-31-2013, 07:28 AM
krazieeyes's Avatar
krazieeyes krazieeyes is offline
Just Gettin Started
 
Join Date: May 2013
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 10
krazieeyes is on a distinguished road
Default Re: FAST-9999 Installaton Instructions

Heavyduty,

Another new install here. It looks like you've been a great help for a lot of users... Here's what I have:

Jensen MSR3012 installed in Boat, BTA8100FHC, FAST-9999, FAST-BTAH

Headunit Connections:

Red/White Rear RCA Line Out

A1. Right Rear Speaker (+) Violet
A2. Right Front Speaker (+) Gray
A3. Left Front Speaker (+) White
A4. Left Rear Speaker (+) Green
A5. Left Rear Speaker (-) Green/Black
A6. Left Front Speaker (-) White/Black
A7. Right Front Speaker (-) Gray/Black
A8. Right Rear Speaker (-) Violet/Back
B1. No Connection - Empty
B2. No Connection - Empty
B3. Power Antenna - Blue
B4. No Connection - Empty
B5. Ground - Black
B6. No Connection - Empty
B7. +12V Switched - Red
B8. No Connection - Empty

What's your advice on this one? - Thanks in advance.
Reply With Quote
  #152  
Old 05-31-2013, 11:14 AM
heavyduty's Avatar
heavyduty heavyduty is offline
Super Moderator
 
Join Date: Jan 2008
Posts: 2,933
Thanks: 349
Thanked 764 Times in 685 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 774
heavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to behold
Default Re: FAST-9999 Installaton Instructions

Quote:
Originally Posted by krazieeyes View Post
Heavyduty,

Another new install here. It looks like you've been a great help for a lot of users... Here's what I have:

Jensen MSR3012 installed in Boat, BTA8100FHC, FAST-9999, FAST-BTAH

Headunit Connections:

Red/White Rear RCA Line Out

A1. Right Rear Speaker (+) Violet
A2. Right Front Speaker (+) Gray
A3. Left Front Speaker (+) White
A4. Left Rear Speaker (+) Green
A5. Left Rear Speaker (-) Green/Black
A6. Left Front Speaker (-) White/Black
A7. Right Front Speaker (-) Gray/Black
A8. Right Rear Speaker (-) Violet/Back
B1. No Connection - Empty
B2. No Connection - Empty
B3. Power Antenna - Blue
B4. No Connection - Empty
B5. Ground - Black
B6. No Connection - Empty
B7. +12V Switched - Red
B8. No Connection - Empty

What's your advice on this one? - Thanks in advance.
Connect the red power wire and the blue/white switched wire to the switched +12V. If the BTAH has the Auto-Turn On Loop, disconnect. Find a solid, verfied ground. Connect using the RCA's for the signal source and configure these outputs for subwoofer duty on the headunit if possible.
__________________
power your system down
Reply With Quote
The Following User Says Thank You to heavyduty For This Useful Post:
Geneh (05-31-2013)
  #153  
Old 09-07-2014, 02:46 PM
bluecat's Avatar
bluecat bluecat is offline
Just Gettin Started
 
Join Date: Sep 2014
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 10
bluecat is on a distinguished road
Default Re: FAST-9999 Installaton Instructions

Hello,

I'm hoping someone is around to help me with my new install. It would be great if someone could tell me what wire needs to go where. I have a toyota prius c and my wiring is as follows:

10-pin connector:
1) lite green (+) right front speaker
2) pink (+) left front speaker
3) red (+) radio ignition (remote)
4) black (+) radio 12V (battery)
5) blue (-) right front speaker
6) purple (-) left front speaker
7) brown (-) ground
8) not used
9) not used
10) lite green (+) radio illumination (parking lights)

6-pin connector:
1) red (+) right rear speaker
2) black (+) left rear speaker
3) white (-) right rear speaker
4) not used
5) white (-) radio illumination (dimmer)
6) yellow (-) left rear speaker

I've already tried the install but I'm not getting any power to the sub. I've got it ground to the chasis so I don't think its my ground. Can someone please confirm which wire on the fast 9999 would correspond to my wiring as described above? Any help would be much appreciated.
Reply With Quote
Reply

Tags
bta10100, bta6100, bta8100, bta850fh, fast, fast-9999, ta850c

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:56 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Template-Modifications by TMS
bazooka.com
SAS, BAZOOKA, BASS TUBES, and LISTEN TO YOUR EARS are registered trademarks of Southern Audio Services, Inc.