Re: Excited but Powerless
First make sure all the connectors are pushed in all the way. (2 ea. 35 pin, 2 ea 23 pin, 1 ea 8 pin and 1 ea. 10 pin)
Check voltage at the amp, putting your meter probes on the positive and negative terminals. This way your are checking the power and ground wire also. Make sure you are getting 12 vdc. Pull the white 10 pin molex connector out of the amp. Check to make sure it has 12 vdc on the blue w/white wire.
If you have voltage at the terminals and all the connectors are pushed in all the way. Then there is a problem with the amp.
"Shoot For The Top...... The Bottom Is Already Full"
Q u o t e s:
To err is human, but to really foul things up requires a computer. Farmers' Almanac