FAST-9999 Installaton Instructions

[heavyduty]

Originally Posted by Tagcart

I just found this


This is the answer i was looking for.

Sorry about the spam.

What other options do I have? The stock stereo doesn't have any RCA output.
PS I'm a noob when it comes to audio..

You will have to connect using the high level inputs (connecting to the existing speakers or anywhere along the harness).

[retnevel]

Does the FAST-9999 install kit work with the BTA10250D?

I didn't see it offered with the BTA10250D.

If 'yes', I trust that I can purchase it separately since I already received the BTA10250D.

thanks,
retnevel

[heavyduty]

Originally Posted by retnevel

Does the FAST-9999 install kit work with the BTA10250D?

I didn't see it offered with the BTA10250D.

If 'yes', I trust that I can purchase it separately since I already received the BTA10250D.

thanks,
retnevel

No, the FAST Harness is not compatiable with the 250D. Purchase an amplifier installation kit to complete the install if you do not already have one.

[Lumberboy]

I am attempting to install the FAST-9999 harness in a non Bose system 2003 Acura RSX. What power wires on the FAST do I connect to the following on the factory deck:

1. ACC (Main Stereo Supply)
2. Constant Power.


My gut tells me that the red wire on the FAST should be connected to the constant power wire and the blue/white wire should be connected to the ACC wire. Is this correct?

Thank you for your help!

BTW the product I am installing is the BTA8100FHC.

[heavyduty]

Originally Posted by Lumberboy

I am attempting to install the FAST-9999 harness in a non Bose system 2003 Acura RSX. What power wires on the FAST do I connect to the following on the factory deck:

1. ACC (Main Stereo Supply)
2. Constant Power.


My gut tells me that the red wire on the FAST should be connected to the constant power wire and the blue/white wire should be connected to the ACC wire. Is this correct?

Thank you for your help!

BTW the product I am installing is the BTA8100FHC.

Yes, connect the red wire of the FAST harness to the constant power and the blue/white wire to the ACC. This should power the Tube right up, as long as there is a proper ground.

[Lumberboy]

Thanks! I got everything wired up properly, hid the harness, and changed the spot I was using as a ground. Lights are green and the bass is great. To be honest I didn't expect it to sound as awesome as it does. The output is amazing and tight.

[chkster]

i am thinking of purchasing the BTA850FH. My head unit has 4 rca outputs for speakers and a subwoofer output... I know that the unit has its own power source etc.. Will the FAST harness that comes with this unit have the RCA plugs??? And if it does what is the procedure for wiring... and if it does not can I get/use the upgraded harness.. for this unit. I do not have a seperate amplifier and will not.

[chkster]

quick follow up... does this unit have a gain control on it?

[heavyduty]

Originally Posted by chkster

i am thinking of purchasing the BTA850FH. My head unit has 4 rca outputs for speakers and a subwoofer output... I know that the unit has its own power source etc.. Will the FAST harness that comes with this unit have the RCA plugs??? And if it does what is the procedure for wiring... and if it does not can I get/use the upgraded harness.. for this unit. I do not have a seperate amplifier and will not.

Yes, it will have RCA's in the FAST-Harness. Use either the RCA's or connect to the speaker wires in the factory harness, but NOT both. The procedure for correct wiring of the FAST System is detailed in the following link;

http://www.bazooka.com/pdf/current/F...tr_rev1_sm.pdf

[heavyduty]

Originally Posted by chkster

quick follow up... does this unit have a gain control on it?

Yes, the gain control of the Tube is on the rear of the unit.