FAST 9999 Universal

[Folgs11]

I need help connecting the universal FAST to my wiring harness in the back of my stereo in 99 intrigue. I printed out the wiring diagram for the car but how to i connect the wires into the harness? What do I do with points on the end of the caps on the FAST or just help in general.

[heavyduty]

Originally Posted by Folgs11

I need help connecting the universal FAST to my wiring harness in the back of my stereo in 99 intrigue. I printed out the wiring diagram for the car but how to i connect the wires into the harness? What do I do with points on the end of the caps on the FAST or just help in general.

Folgs, here is a schematic for connecting the FAST-9999 to your factory harness.

FAST 9999
Red: power
Blue/White: remote turn on
Left Front (-): White/Black
Left Front (+): White
Right Front (-): Gray/Black
Right Front (+): Gray

You will want to tap into the front speakers for your signal. When and if you do use the fader, you will most likely fade to front, reducing the volume out of the rear speakers. By doing so, you are reducing the voltage to the speakers and also the Tube if you connect to the rear speakers for your signal. By connecting to the front speakers, you will not be reducing the voltage (think output) to the Tube. As for the connection itself, unscrew the cap, place the appropriate wire in place and screw the cap back on. Please post back with anymore questions you may have.

[Folgs11]

Thanks that helps some but do I need to splice the wires to tap into them? I thought the harness was supposed to make it so you dont splice?

[heavyduty]

Originally Posted by Folgs11

Thanks that helps some but do I need to splice the wires to tap into them? I thought the harness was supposed to make it so you dont splice?

Here is a link explaining the type of connector you are dealing with. Again, the FAST-9999 taps into the wire for a signal, not cut the wire as most other splices do t-taps or quick-splice connectors.

http://www.posi-lock.com/posiplug.html

[Folgs11]

I tapped into the wires in the back of my stereo. I turned on the radio and no music would play. So I took off the ground and the music came back on. Whenever i grounded it the music went off. Although, my tube is not showing power (the green light is on) My car does not have a remote turn of so I'm not sure what to do with that wire. This is the diagram for my 99 intrigue Constant 12V+Orange Switched 12V+Yellow GroundBlack/White IlluminationGray/Black DimmerBrown/White Antenna TriggerDark Green AntennaRight Rear Front Speakers5 1/4" DoorsLeft Front (+)Tan Left Front (-)Gray Right Front (+)Light Green Right Front (-)Dark Green Rear Speakers6" x 9" Rear DeckLeft Rear (+)Brown Left Rear (-)Yellow Right Rear (+)Dark Blue Right Rear (-)Light Blue
Any Help would be appreciated!

[heavyduty]

Originally Posted by Folgs11

I tapped into the wires in the back of my stereo. I turned on the radio and no music would play. So I took off the ground and the music came back on. Whenever i grounded it the music went off. Although, my tube is not showing power (the green light is on) My car does not have a remote turn of so I'm not sure what to do with that wire. This is the diagram for my 99 intrigue Constant 12V+Orange Switched 12V+Yellow GroundBlack/White IlluminationGray/Black DimmerBrown/White Antenna TriggerDark Green AntennaRight Rear Front Speakers5 1/4" DoorsLeft Front (+)Tan Left Front (-)Gray Right Front (+)Light Green Right Front (-)Dark Green Rear Speakers6" x 9" Rear DeckLeft Rear (+)Brown Left Rear (-)Yellow Right Rear (+)Dark Blue Right Rear (-)Light Blue
Any Help would be appreciated!

I don't quite understand what you are talking about. What ground wire are you referring to? As for your remote turn-on, this is also your switched 12v source.

[Folgs11]

I Guess my point was I wasn't sure where to put the remote turn on so that could have been causing the problems. Thanks again.