Please ID my tube

[Al3x]

This has tube has been sitting in my basement for years. Lost the harnesses and need new ones and don't know what I need and where to get it. Any help would be appreciated. TIA.

[Al3x]

I also need to know what mounting hardware will work for it.

[heavyduty]

Originally Posted by Al3x

I also need to know what mounting hardware will work for it.

Welcome to the Bazooka Forum. Your Tube is a A70.

http://www.bazooka.com/tech/wiring-diagrams/A-70

The 10 pin molex connector is available through Customer Service. Call 1-800-THE-TUBE and order part number HARNESS and PP-K. As for the mounting straps, find out what size Tube you have and order the correct nylon mounting base/straps.

Please post back with any other questions you may have.

[Al3x]

Originally Posted by heavyduty

Welcome to the Bazooka Forum. Your Tube is a A70.

http://www.bazooka.com/tech/wiring-diagrams/A-70

The 10 pin molex connector is available through Customer Service. Call 1-800-THE-TUBE and order part number HARNESS and PP-K. As for the mounting straps, find out what size Tube you have and order the correct nylon mounting base/straps.

Please post back with any other questions you may have.

Thanks for all the info. I just called and got the harnesses and straps ordered. One more question, I forgot what the purpose was of the bypass switch above where the harness plugs in at. I lost the little plastic piece. Any suggestions?

[heavyduty]

Originally Posted by Al3x

Thanks for all the info. I just called and got the harnesses and straps ordered. One more question, I forgot what the purpose was of the bypass switch above where the harness plugs in at. I lost the little plastic piece. Any suggestions?

Your referring to the Auto-Turn On jumper. You need to connect the center pin and the pin on the right to put this in the off position if you are going to connect the Orange wire of the Tube's harness to a switched +12v power source.

[Al3x]

Originally Posted by heavyduty

Your referring to the Auto-Turn On jumper. You need to connect the center pin and the pin on the right to put this in the off position if you are going to connect the Orange wire of the Tube's harness to a switched +12v power source.

I received my plugs and straps today.
I want to use the the remote turn on from my deck to the orange wire. What do you suggest I do or use to accomplish this? What I can I use as a jumper?
Thanks!