View Single Post
  #1  
Old 06-13-2014, 06:03 PM
signguy62's Avatar
signguy62 signguy62 is offline
Just Gettin Started
 
Join Date: May 2014
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 10
signguy62 is on a distinguished road
Default BTA850FH install ??

Okay I read through the forums and as far as I can tell I'm hooked up right. The tube works, powers up and thumps! But I'm having some issues. I dont have the FAST system just the harness that plugs into the tube and then gets wired to the head unit. I'm using the RCA's connected to the rear/sub outs on the head unit, the red wire is hooked to 12v constant (yellow on my head unit), the blue/white to 12v switched (red on my head unit) and a good ground. Problems....It (the tube) thumps when I turn on the vehicle. And if I adjust anything bass, mid, treb, etc....it effects the tube? Suggestions?
Reply With Quote