Originally Posted by heavyduty
If the tear is small enough, you can try to use a glue, such as a sealant, however, the overhwleming factor you have to be aware of is adding weight to the subwoofer itself. This is always a bad thing. The lighter the adhesive, the better. Ideally, flip the driver over and see if you can glue from the inside, using adhesive on the flap of the torn surround.
thanks for the response heavyduty. Its a fairly small tear (smaller than a tick-tac sized flap). Should I lightly coat the entire flap and the surrounding area or just the edges of the flap itself? (I can reach under the flap btw!)
Thanks for the help!