View Single Post
  #152  
Old 05-31-2013, 11:14 AM
heavyduty's Avatar
heavyduty heavyduty is offline
Super Moderator
 
Join Date: Jan 2008
Posts: 2,868
Thanks: 333
Thanked 736 Times in 660 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 746
heavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to behold
Default Re: FAST-9999 Installaton Instructions

Quote:
Originally Posted by krazieeyes View Post
Heavyduty,

Another new install here. It looks like you've been a great help for a lot of users... Here's what I have:

Jensen MSR3012 installed in Boat, BTA8100FHC, FAST-9999, FAST-BTAH

Headunit Connections:

Red/White Rear RCA Line Out

A1. Right Rear Speaker (+) Violet
A2. Right Front Speaker (+) Gray
A3. Left Front Speaker (+) White
A4. Left Rear Speaker (+) Green
A5. Left Rear Speaker (-) Green/Black
A6. Left Front Speaker (-) White/Black
A7. Right Front Speaker (-) Gray/Black
A8. Right Rear Speaker (-) Violet/Back
B1. No Connection - Empty
B2. No Connection - Empty
B3. Power Antenna - Blue
B4. No Connection - Empty
B5. Ground - Black
B6. No Connection - Empty
B7. +12V Switched - Red
B8. No Connection - Empty

What's your advice on this one? - Thanks in advance.
Connect the red power wire and the blue/white switched wire to the switched +12V. If the BTAH has the Auto-Turn On Loop, disconnect. Find a solid, verfied ground. Connect using the RCA's for the signal source and configure these outputs for subwoofer duty on the headunit if possible.
__________________
power your system down
Reply With Quote
The Following User Says Thank You to heavyduty For This Useful Post:
Geneh (05-31-2013)