View Single Post
  #1  
Old 05-21-2013, 12:53 PM
barryf's Avatar
barryf barryf is offline
Just Gettin Started
 
Join Date: May 2013
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 10
barryf is on a distinguished road
Default recommendations for small vented enclosure

Greetings folks....I have two rsw1024dvc woofers in ported boxes built to spec per the owners manual. They sound great but with a new vehicle comes new boxes. Problem is I only have about .7 cu ft per sub available now.
I would prefer to get a response curve like a ported enclosure. The recommended sealed box response curve tapers off a little too high. I'd like to use a 4" diameter port in a .7 cu ft box with a resonance of 60hz or lower. Could use some help determining port length. I know I won't get the 40hz that the original box produces.
Alternatively, I would consider a clamshell isobaric vented configuration and realize I lose some efficiency there.

I welcome any suggestions. Thanks
Reply With Quote