View Single Post
  #2  
Old 04-29-2013, 08:10 AM
Geneh's Avatar
Geneh Geneh is offline
Super Moderator
 
Join Date: Feb 2008
Posts: 470
Thanks: 317
Thanked 139 Times in 120 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 149
Geneh will become famous soon enoughGeneh will become famous soon enough
Default Re: Poss Bad Amp ???

Rglide,
This is how you can check the system. Disconnect the BTA6100 then turn the system on and see if that makes a difference. Make sure the HP/Full selector is not in the middle. Turn system off then plug the BTA6100 and turn the gain on the 4 channel amp all the way down (counter clock). Them listen to that. Also check your ground and power connections to make sure they are clean and tight. Just changing your battery should not have done anything to the CSA4 or the BTA6100.
__________________
"Shoot For The Top...... The Bottom Is Already Full"

Q u o t e s:
To err is human, but to really foul things up requires a computer. Farmers' Almanac, 1978

Last edited by Geneh; 04-29-2013 at 08:16 AM.
Reply With Quote
The Following User Says Thank You to Geneh For This Useful Post:
heavyduty (04-29-2013)