View Single Post
  #2  
Old 02-10-2013, 12:11 PM
heavyduty's Avatar
heavyduty heavyduty is offline
Super Moderator
 
Join Date: Jan 2008
Posts: 2,952
Thanks: 351
Thanked 771 Times in 690 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 781
heavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to behold
Default Re: BTA6250D Won't Power Up

Quote:
Originally Posted by bradshawkyle View Post
I received a BTA6250D for Christmas and finally for around to installing it today in my 2007 Honda Ridgeline with OEM head-unit. I ran all the wiring and can't seem to get it to turn on - no LED, no thump, nothing. I checked 12v power, which was fine. I checked the remote turn-on and get 4v switched. I also ran a voltage drop test on the ground, which came back fine as well. Any ideas what to try next, or do I have a defective unit?

Thanks for your help.
Where do you have the constant +12v connected?

The orange remote wire should be connected to a switched +12v source.

Measure resistance at your ground, this should read zero.
__________________
power your system down
Reply With Quote