View Single Post
  #4  
Old 01-05-2013, 05:48 PM
heavyduty's Avatar
heavyduty heavyduty is offline
Super Moderator
 
Join Date: Jan 2008
Posts: 2,868
Thanks: 333
Thanked 736 Times in 660 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 746
heavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to behold
Default Re: Help with BTA 10250D

Quote:
Originally Posted by J.lafriend View Post
I replaced the fast interface harness that came with the smaller BTA 8100FHC with a heavier gauge wire harness. 8 gauge wire for power and ground, 16 gauge for the amp turn on lead and monster cable RCA cords.
Intermittant issues are always a bit tricky. Check all of the connections on the power cable; at the harness of the Tube, the inline fuse holder and finally the postive battery terminal. Use a DMM if you have one handy. Be sure to do the same with the ground connection and the ground terminal.
__________________
power your system down
Reply With Quote