View Single Post
  #2  
Old 07-31-2012, 09:20 AM
Geneh's Avatar
Geneh Geneh is offline
Super Moderator
 
Join Date: Feb 2008
Posts: 504
Thanks: 339
Thanked 153 Times in 131 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 163
Geneh has a spectacular aura aboutGeneh has a spectacular aura about
Default Re: Excited but Powerless

First make sure all the connectors are pushed in all the way. (2 ea. 35 pin, 2 ea 23 pin, 1 ea 8 pin and 1 ea. 10 pin)

Check voltage at the amp, putting your meter probes on the positive and negative terminals. This way your are checking the power and ground wire also. Make sure you are getting 12 vdc. Pull the white 10 pin molex connector out of the amp. Check to make sure it has 12 vdc on the blue w/white wire.


If you have voltage at the terminals and all the connectors are pushed in all the way. Then there is a problem with the amp.
__________________
"Shoot For The Top...... The Bottom Is Already Full"

Q u o t e s:
To err is human, but to really foul things up requires a computer. Farmers' Almanac, 1978
Reply With Quote
The Following 2 Users Say Thank You to Geneh For This Useful Post:
heavyduty (07-31-2012), Smitty_ (08-02-2012)