View Single Post
  #11  
Old 06-25-2012, 12:13 PM
lbrowne's Avatar
lbrowne lbrowne is offline
Just Gettin Started
 
Join Date: Jun 2012
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 10
lbrowne is on a distinguished road
Default Re: FAST-9999 Installaton Instructions

Lots of good help in here!

I recently bought a bazooka bta850fhc that has the fast9999 and fastbtah harnesses.

At first the was hardly anything coming out - turns out I needed to tap the yellow wire out of my JVC headunit for battery constant. (I had initially used the red off the jvc harness which was actually ignition)

But I still don't have the bass I want. It seems like it's still primarily coming from my jvc speakers.

The cone in the bazooka is moving with the bass but it's definitely not enough.

My deck has sub level control, high pass filter (which if I turn on, all bass in my system vanishes). So maybe I should use the RCA inputs?

I've tapped all the speaker wires, they matched up with the jvc harness. I'm using the blue/white remote on wire from my JVC harness as well.

If my ground wasn't good I would suspect the cone wouldn't move at all.

Ideas?

Cheers!
Reply With Quote