Quote:
Originally Posted by davidfunke
So there is no problem connecting the blue/white wire to the same wire I connected the subs 12v red power wire, to the red power wire that runs from the battery to the stereo? no loop problems.
Also, I thought there was a way that the sub could be connected to use it's own auto sensing on off so I wouldn't need a switch?
|
Connecting to the power wire will present no problem at all.
You will need to use the harness ELA-HP-AWK for the Auto Turn-On Loop. Give Tech. Support a call at 1-800-THE-TUBE to inquire about switching out the harness.