View Single Post
  #63  
Old 04-06-2012, 07:59 AM
hammertime's Avatar
hammertime hammertime is offline
Just Gettin Started
 
Join Date: Apr 2012
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 10
hammertime is on a distinguished road
Default Re: FAST-9999 Installaton Instructions

Heavy Duty, I have the BTA 8100 with the fast harness. Am I understanding correctly that I am better off connecting to the speaker wires in the harness rather than using the rca's? Also, I have a jensen MSR3007 Head unit in my pontoon. I am trying to wire this correctly. I connected the red wire on the Fast harness to the red wire on my head unit harness, it was called acessory/ignition (+), and the blue wire to the blue wire on my head unit that was called (power antenna). The other non/speaker wire choices for these connections was black/shield: rear line audio negative, red: rear right line level out, white: rear left line level out.

I have no power to my sub the way i have it connected. The red wire that I connected the power to is a bit thicker than the other wires. Where am i going wrong???
Reply With Quote