View Single Post
  #2  
Old 10-17-2011, 05:16 PM
heavyduty's Avatar
heavyduty heavyduty is offline
Super Moderator
 
Join Date: Jan 2008
Posts: 2,952
Thanks: 351
Thanked 771 Times in 690 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 781
heavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to beholdheavyduty is a splendid one to behold
Default Re: BTA850FH and audio cut out.

Quote:
Originally Posted by BlueFireIce View Post
I got a BTA850FH for my 2007 Eclipse, installed and seemed to go well, until I turned up the volume, and poof, all audio cuts out. The OEM head unit acts like it's still on, but I have to turn down the volume and turn off and back on to get audio back. As a note, I have worked with computers and wiring allot, and have checked everything I could think of, I checked and moved the ground, with no effect, right now it is hooked into mount in the rear trunk, area was cleaned for good metal contact and put in place with a 12mm bolt. I rechecked all the hook ups for the FAST with the OEM wire diagrams for the 5th time and everything is in place.

Any ideas on what might be going on? Pulling to much power through the OEM stuff?
Disconnect the Tube and see if the headunit will remain on at the same volume you're having problems with now.
__________________
power your system down
Reply With Quote