Hey, sorry i am totally NOOB at using this even though i have the Bazooka 850FH.
I have a Pioneer AVH-P4100DVD
http://a248.e.akamai.net/pix.crutchf...130AVHP410.PDF
I read your post earlier in the thread,
the
Red Wire -> should connect to +12v Constant ---> which for my p
ioneer reciever harness =
Yellow
the
Blue/White -> should connect to the +12v switched (key-on/key-off) or the amplifier remote ---> which is
RED / or
Blue White on my
Pioneer Reciever
according to the PDF supplied by Pioneer 4100DVD Manual
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC)
Blue/white
Connect to system control terminal of the power amp or
auto-antenna relay control terminal
Im lost with the FAST Blue/White wire..is it supposed to connect to my harness's
BLUE/WHITE or
RED
please take a look at the instruction manual for my aftermarket reciever, and thanks for the help, i really love the bazooka bass tube and might upgrade to a bigger one eventually