Setting Crossover on HU with EL8A
I have used the FAST system to hook up my EL8A and it works fine. My question, though, is I have a JVC HU that has crossover settings. Since I'm tapping into the speaker wires, how would I use the crossover on the HU to keep the bottom frequencies out of the 4 door speakers and just to the sub? HPF or LPF or SW? Or since I'm tapping into the wires, will the crossover on the HU make any difference?
Re: Setting Crossover on HU with EL8A
If you are using a FAST-9999 with the RCA's, connect the RCA's to the Tube and take advantage of filtering out the low notes on the main speakers. If everything sounds good as is, you can always play around with the filters, but you will probably find leaving the system as is, will sound best.
Long winded post, for sure, but I do like to provide some details with every question posted! Post back with any other questions.
|All times are GMT -5. The time now is 11:50 AM.|
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.