Club Bazooka

Club Bazooka (http://www.bazooka.com/forums/index.php)
-   Amplified Tube Subwoofers (http://www.bazooka.com/forums/forumdisplay.php?f=9)
-   -   Need install help. Suzuki grand vitara 2008 (http://www.bazooka.com/forums/showthread.php?t=8294)

Biohazard1150 04-08-2013 02:44 AM

Need install help. Suzuki grand vitara 2008
 
Hi all and thanks in advance for your help. I picked up the bta6100 amplified sub to replace the ****ty stock sub under my seat in my suzuki gv. The stock sub blew which is apparently common in 100% of the suzukis once used. It has a molex connector I'd like to tap into and not disrupt any current wiring as ill be getting rid of the car after the summer and don't want to effect it's "stock-ness"

Here is the wiring of the molex for the torisan (Sanyo) sub:

White/blue = switched 12V
Black = Ground
Blue = Left rear +
Green/black = Left rear -
Blue/black = right rear +
Grey/red = right rear -

Now, I'd like to wire directly into this but the 12v is purely switched. Would I connect the red to this and leave the orange remote lead unused, could I wire both to it, or do I absolutely have to tap into the battery head or a 12v cigarette adapter on the red and connect the orange to the provided 12v in the molex connector? I'm making my own female end to this molex and sealing in the stock bazooka wires so its all nice a professional and want to make sure I have it wired right.

Thanks again
-james

Biohazard1150 04-08-2013 02:47 AM

Re: Need install help. Suzuki grand vitara 2008
 
Also, I forgot, the left and right leads on this, would they go to an RCA connector or to the hi-lev connections on the sub? I was assuming RCA, but as I'm already asking silly questions i thought I'd tack it on. Also I'm guessing with this, it's never safe to assume.

Thanks

heavyduty 04-08-2013 11:40 AM

Re: Need install help. Suzuki grand vitara 2008
 
Quote:

Originally Posted by Biohazard1150 (Post 34358)
Also, I forgot, the left and right leads on this, would they go to an RCA connector or to the hi-lev connections on the sub? I was assuming RCA, but as I'm already asking silly questions i thought I'd tack it on. Also I'm guessing with this, it's never safe to assume.

Thanks

Connect both the red wire and the orange wire of the FAST harness to the switched +12v wire of the factory harness. Make the signal connections using the High Level Inputs of the FAST Harness.

Biohazard1150 04-09-2013 04:31 AM

Re: Need install help. Suzuki grand vitara 2008
 
Thank you so much. I was able to build a harness in the shell of the old amp and wire straight through to the trunk. No splicing at all, just connected the FAST harness to the old molex.

Thanks again. You rock


All times are GMT -5. The time now is 01:35 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
bazooka.com