Club Bazooka

Club Bazooka (http://www.bazooka.com/forums/index.php)
-   Amplified Tube Subwoofers (http://www.bazooka.com/forums/forumdisplay.php?f=9)
-   -   bazooka EL8A with only fast 9999 (http://www.bazooka.com/forums/showthread.php?t=8202)

runningmann 01-11-2013 06:37 PM

bazooka EL8A with only fast 9999
 
Hi, I was wondering if I install an EL8A using a fast-9999, will I also need to use a power supply, or will the 12v from the radio be enough.

Regards

heavyduty 01-12-2013 02:38 PM

Re: bazooka EL8A with only fast 9999
 
Quote:

Originally Posted by runningmann (Post 34160)
Hi, I was wondering if I install an EL8A using a fast-9999, will I also need to use a power supply, or will the 12v from the radio be enough.

Regards

There are two ways to connect any FAST compatible Tube, EITHER using the FAST System or by connecting to the positive battery terminal of the battery like any other installation. Again, this is an EITHER/OR situtation.

The FAST System was developed and designed to make installation a breeze. Due to the amplifier design of the FAST Compatiable Tubes, amperage draw is quite low, allowing for a safe and secure power connection at the headunit using the factory wiring harness,

runningmann 01-14-2013 05:17 AM

Re: bazooka EL8A with only fast 9999
 
Thank you for your fast reply. Is the el8a or el8a-hp compatible with the fast system?

heavyduty 01-14-2013 07:12 AM

Re: bazooka EL8A with only fast 9999
 
Quote:

Originally Posted by runningmann (Post 34167)
Thank you for your fast reply. Is the el8a or el8a-hp compatible with the fast system?

The Fast Connector System allows, easy, quick, plug-in installation of any Bazooka BTA100, ELa, or ELa-hp Amplified Tube Subwoofers.


All times are GMT -5. The time now is 06:36 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
bazooka.com