Club Bazooka

Club Bazooka (http://www.bazooka.com/forums/index.php)
-   Customer Service (http://www.bazooka.com/forums/forumdisplay.php?f=22)
-   -   Issue with my BTA10100 (http://www.bazooka.com/forums/showthread.php?t=6725)

Nysik 07-21-2011 01:30 PM

Issue with my BTA10100
 
Hello, I have a problem.

I have the BTA10100 and on the back there is the gain control as well as a switch that changes the sound of the sub. Anyways, as of recently I have noticed that when the switch is in the down position the sub hardly has any output whatsoever, regardless of my gain setting. I put my hand on the sub and it barely vibrates... and the sound is definitely not there! When the switch is in the up position the sub seems to be working fine.

Please tell me what might be wrong and what I can do to fix this issue! :confused:

heavyduty 07-21-2011 01:57 PM

Re: Issue with my BTA10100
 
Quote:

Originally Posted by Nysik (Post 31235)
Hello, I have a problem.

I have the BTA10100 and on the back there is the gain control as well as a switch that changes the sound of the sub. Anyways, as of recently I have noticed that when the switch is in the down position the sub hardly has any output whatsoever, regardless of my gain setting. I put my hand on the sub and it barely vibrates... and the sound is definitely not there! When the switch is in the up position the sub seems to be working fine.

Please tell me what might be wrong and what I can do to fix this issue! :confused:

Nothing is wrong with your Tube. The switch you are referring to is the Input Phase Switch. When in the correct position, you will have bass output. Whe in the incorrect position you will have no bass output. You can read more about the Input Phase Switch on page 19 of your owner's manual. :)47

Nysik 07-22-2011 02:28 PM

Re: Issue with my BTA10100
 
Okay thanks for the reply. One odd thing about it though is that up until last week this was not the case. I used to change the switch from up to down and vice versa depending on the type of music I was listening too. So what it sounds like is that it was not working correctly before, but now it is?

Odd, but no big deal. Thanks again!


All times are GMT -5. The time now is 08:43 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
bazooka.com