Club Bazooka

Club Bazooka (http://www.bazooka.com/forums/index.php)
-   Hook me up! (http://www.bazooka.com/forums/forumdisplay.php?f=19)
-   -   Please ID my tube (http://www.bazooka.com/forums/showthread.php?t=6509)

Al3x 02-16-2011 11:56 PM

Please ID my tube
 
This has tube has been sitting in my basement for years. Lost the harnesses and need new ones and don't know what I need and where to get it. Any help would be appreciated. TIA.
http://i809.photobucket.com/albums/z...hd/photo-8.jpg
http://i809.photobucket.com/albums/z...hd/photo-9.jpg
http://i809.photobucket.com/albums/z...d/photo-10.jpg

Al3x 02-16-2011 11:59 PM

Re: Please ID my tube
 
I also need to know what mounting hardware will work for it.

heavyduty 02-17-2011 05:33 AM

Re: Please ID my tube
 
Quote:

Originally Posted by Al3x (Post 30237)
I also need to know what mounting hardware will work for it.

Welcome to the Bazooka Forum. Your Tube is a A70.

http://www.bazooka.com/tech/wiring-diagrams/A-70

The 10 pin molex connector is available through Customer Service. Call 1-800-THE-TUBE and order part number HARNESS and PP-K. As for the mounting straps, find out what size Tube you have and order the correct nylon mounting base/straps.

Please post back with any other questions you may have. :)47

Al3x 02-18-2011 11:08 AM

Re: Please ID my tube
 
Quote:

Originally Posted by heavyduty (Post 30238)
Welcome to the Bazooka Forum. Your Tube is a A70.

http://www.bazooka.com/tech/wiring-diagrams/A-70

The 10 pin molex connector is available through Customer Service. Call 1-800-THE-TUBE and order part number HARNESS and PP-K. As for the mounting straps, find out what size Tube you have and order the correct nylon mounting base/straps.

Please post back with any other questions you may have. :)47

Thanks for all the info. I just called and got the harnesses and straps ordered. One more question, I forgot what the purpose was of the bypass switch above where the harness plugs in at. I lost the little plastic piece. Any suggestions?

heavyduty 02-18-2011 01:31 PM

Re: Please ID my tube
 
Quote:

Originally Posted by Al3x (Post 30243)
Thanks for all the info. I just called and got the harnesses and straps ordered. One more question, I forgot what the purpose was of the bypass switch above where the harness plugs in at. I lost the little plastic piece. Any suggestions?

Your referring to the Auto-Turn On jumper. You need to connect the center pin and the pin on the right to put this in the off position if you are going to connect the Orange wire of the Tube's harness to a switched +12v power source.

Al3x 02-23-2011 08:37 PM

Re: Please ID my tube
 
Quote:

Originally Posted by heavyduty (Post 30245)
Your referring to the Auto-Turn On jumper. You need to connect the center pin and the pin on the right to put this in the off position if you are going to connect the Orange wire of the Tube's harness to a switched +12v power source.

I received my plugs and straps today.
I want to use the the remote turn on from my deck to the orange wire. What do you suggest I do or use to accomplish this? What I can I use as a jumper?
Thanks!

heavyduty 02-23-2011 08:52 PM

Re: Please ID my tube
 
Quote:

Originally Posted by Al3x (Post 30273)
I received my plugs and straps today.
I want to use the the remote turn on from my deck to the orange wire. What do you suggest I do or use to accomplish this? What I can I use as a jumper?
Thanks!

Depending on the distance between jumpers, you may be able to find a connector at a local electronics or computer store. You may find one that has leads that you will have to connect together to complete the circuit. If not, you may be able to use an insulated female connector to connect the two terminals. Whatever you decide to do, make sure you measure the distance between the terminals to find the appropriate size connector.


All times are GMT -5. The time now is 07:00 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
bazooka.com