Club Bazooka

Club Bazooka (http://www.bazooka.com/forums/index.php)
-   Customer Service (http://www.bazooka.com/forums/forumdisplay.php?f=22)
-   -   MAC 8002 marine speaker reapair (http://www.bazooka.com/forums/showthread.php?t=6251)

Prplngld8 06-27-2010 03:59 PM

MAC 8002 marine speaker reapair
 
1 Attachment(s)
Hi I recently pulled out my 8" marine speakers, and in the process pulled out one the wires for what looks like a capacitor on the speaker. Anyway what would be the best way to get this repaired? Can I mail them to bazooka? or even drop them off? I live in New Orleans.

Thanks

heavyduty 06-27-2010 04:39 PM

Re: MAC 8002 marine speaker reapair
 
Quote:

Originally Posted by Prplngld8 (Post 29098)
Hi I recently pulled out my 8" marine speakers, and in the process pulled out one the wires for what looks like a capacitor on the speaker. Anyway what would be the best way to get this repaired? Can I mail them to bazooka? or even drop them off? I live in New Orleans.

Thanks

The wire you pulled out connects to the crossover network on the speaker. Repairing this will just be a matter of soldering the wire back in place. Any electronics repair shop can handle this, or even you if you are handy with a soldering iron. If you would rather have Bazooka do the repair, which is always an option, you will have to call Customer Service tomorrow and get a RA number and discuss your options on shipping the speaker or dropping it off. :)47

Prplngld8 06-28-2010 07:02 PM

Re: MAC 8002 marine speaker reapair
 
Are you sure? I went by a speaker repair shop today and he seemed to think it was pulled out of a capacitor and said the whole speaker had to be replaced. I dunno. Anyway I am fairly good with a sodering iron, I'm just not sure what to solder the wire to? The wall of the tube or just anywhere inside it or what??

heavyduty 06-28-2010 07:32 PM

Re: MAC 8002 marine speaker reapair
 
Quote:

Originally Posted by Prplngld8 (Post 29101)
Are you sure? I went by a speaker repair shop today and he seemed to think it was pulled out of a capacitor and said the whole speaker had to be replaced. I dunno. Anyway I am fairly good with a sodering iron, I'm just not sure what to solder the wire to? The wall of the tube or just anywhere inside it or what??

From the picture you have posted it is a bit difficult to see exactly what is damaged, however, if the lead from the capacitor is damaged then you can replace the capacitor by simply matching the voltage and uf rating.

Prplngld8 06-28-2010 09:38 PM

Re: MAC 8002 marine speaker reapair
 
Thanks for all the help. I was able to purchase another capacitor from radioshack and replaced it and it sounds great!

heavyduty 06-28-2010 10:04 PM

Re: MAC 8002 marine speaker reapair
 
Quote:

Originally Posted by Prplngld8 (Post 29103)
Thanks for all the help. I was able to purchase another capacitor from radioshack and replaced it and it sounds great!

Glad I could help. Enjoy your time on the water. :)47


All times are GMT -5. The time now is 03:46 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
bazooka.com